aisDrone EN
70000,00 zł
Purchase of a drone with access to applications (aisInpection, aisReport) performing automatic inspection of wind turbine blades. Advanced flight control system, artificial intelligence (AI) algorithms make aisDrone SmartDrones a unique solution on the unmanned aerial vehicle market, as it allows for inspection of the technical condition of wind turbine blades in a fully automated manner – the drone pilot only needs to start the inspection mission.
Description
It is designed for flights within line of sight (requires NSTS-02 VLOS <25kg). The actual flight time may vary depending on the camera configuration and weather conditions – it is about 30 minutes. Descent speed 4 m/s, maximum flight speed 15 m/s – but in inspection conditions these values are never achieved, because the mission is performed at a pace that allows for correct analysis of defects, i.e. resultant speed up to 3 m/s. Wind resistance up to 12 m/s.
Flight automation means that the pilot does not have to plan the mission before each turbine inspection – the drone independently locates itself in relation to the turbine nacelle and its blades and flies along the optimal route, also performing automatic image acquisition that does not require planning.
aisDrone has a dedicated controller with a mobile application where the pilot receives all the necessary telemetry information about the drone: position, its altitude and flight speed, current flight course status and the status of the automatic inspection mission being performed.
The customer receives a drone with a controller and a set of 4 batteries with a charger – all in convenient transport cases.
| Drone | aisDrone |
| Dimensions | Unfolded, without propellers, 707x707x470mm, Folded, with propellers, 1095x1095x470mm, |
| Weight | About 5.5 kg |
| Maximum load capacity | 2 kg |
| Maximum take-off weight | 10 kg |
| Working frequencies | 5100-5825 MHz |
| Signal strength | 25dBm / 320mW |
| Hover accuracy | Vertically:
±0.2 m Horizontally: ±2 m |
| Maximum angular velocity | Pitch/roll: 200°/s, Yaw: 100°/s |
| Maximum tilt angle | 30° |
| Maximum climb speed | 4 m/s |
| Maximum falling speed | 4 m/s |
| Maximum speed | 15 m/s |
| Wind resistance | 12 m/s |
| Maximum flight time | 30 minutes |
| Drone battery | Li-Pol 6S 25000 mAh |
| Camera | Sigma fp L |
| Gimbal | Gremsy S1V3 |
| GNSS | GPS+GLONASS+BeiDou+Galileo |
| Operating temperature | 5°C do 40°C |
| Scanner field of view | Front: 70°（horizontally)，70°（vertically) |
| FPV camera resolution | 1080P |
| FPV camera field of view | 160 |
| FPV camera frame rate | 30fps |
| VPV camera resolution (Vertical) | 1080P |
| VPV camera field of view (vertical) | 160 |
| VPV camera frame rate (vertical) | 30fps |
| Ground Control Station | aisGCS |
| Working frequencies | 5100-5825 MHz |
| Maximum transmission range | 8 km |
| Signal strength | 25dBm / 320mW |
